Flying-Hobby
ALWARE PRO CAMERA MOUNT OUTERMOST FRAME PART (FOR V2)
| Used for Alware 3-Axis 330/500X Pro V2 Camera Mount Model | ALPRO3CMV2 |
Feature:, Item Included:, 1x Fiber glass Outermost Frames,
Flying-Hobby
ALWARE PRO (V2) CAMERA MOUNT MOUNTING FRAME
| Used for Alware 3-Axis 330/500X Pro V2 Camera Mount W/ Wide Angle 260D Digital Servos Model | ALPRO3CMV2 only. |
Feature:, Item Included:, 1x 2mm Fiber Glass Mount Fame (Refer to the photo),
Flying-Hobby
ALWARE PRO (V2) CAMERA MOUNT LANDING GEAR PART
| Alware 3-Axis 330/500X Pro V2 Camera Mount W/ Wide Angle 260D Digital Servos Model | ALPRO3CMV2 only. |
Feature:, Alware Pro (V2) Camera Mount Landing Gear Parts is used for, Item Included:, Fiber glass frames only (Refer to the photo),
Flying-Hobby
ALWARE PRO (V2) CAMERA MOUNT SPUR GEAR 29T
| Used for Alware 3-Axis 330/500X Pro V2 Camera Mount W/ Wide Angle 260D Digital Servos Model | ALPRO3CMV2 only. |
Feature:, Item Included:, 1x Fiber Glass Spur Gear 29T,
(1.5mm Thick)Flying-Hobby
GAUI 500X STORAGE BAG
| Used for GAUI 500X Quad Flyer ( Kit Only ) Model | 222001 |
| Specification | Length |
| Diameter | 113mm |
Flying-Hobby
SONY IR SHUTTER FOR RC
| - Compatible Model | Sony Cameras NEX 5/ NEX 7 |
Introduction:, You've probably noticed that many digital cameras come with infrared remotes for snapping pictures remotely. Now you can do this for your aerial filming as well! An RC Radio-Infrared Shutter Module converts a pulse signal from your receiver into an infrared signal that tells the camera to snap the pictures in the air., Features:, Note:, your camera may not be included in the above list. Please check the manual of your Sony camera to see whether it is compatible with IR remote controller., Included:, 1x Sony IR Shutter Module,
This RC Shutter Module controlling your IR remote compatible Sony ...Flying-Hobby
CANON IR SHUTTER FOR RC
| - Compatible Model | Canon Cameras 5D/ 7D/ 500D/ 550D |
Introduction:, You've probably noticed that many digital cameras come with infrared remotes for snapping pictures remotely. Now you can do this for your aerial filming as well! An RC Radio-Infrared Shutter Module converts a pulse signal from your receiver into an infrared signal that tells the camera to snap the pictures in the air., Features:, Note:, your camera may not be included in the above list. Please check the manual of your Canon camera to see whether it is compatible with IR remote controller., Included:, 1x Canon IR Shutter Module,
This RC Shutter Module controlling your IR remote compatible Canon ...Flying-Hobby
MIKADO LOGO 600 3D ELECTRIC HELICOPTER KIT - FBL OPTIONS
| Specifications | - Motor mount |
| - Rotor diameter | 1250mm to 1450mm |
| - Rotor blades | 600/620/650mm |
| - Main gear ratio | 8,1 |
| - Weight | 3,2 kg and up |
| - Battery | 6S to 10S LiPoly |
| pinion | MIK4412 12 tooth |
| Cyclic servos | FutabaBLS 451 or JR 8717 or BLS 253 |
| Tail Servo | Futaba BLS 251 or JR 8900G |
| ESC | Kontronics Jive80HV or Casle Creations Ice 80 HV |
| Battery | 10cell 5000MAH |
Super light, extremely rigid mainframe:, The mainframe consists of a right and a left frame made from glassfiber-reinforced polymer. A number of components which are usually separate parts are fully integrated into this frame, and do not have to be bought separately, for example bearing case, battery tray and servo mounting plate. There is ample space for any brand of available battery. The mainframe offers enough room for motors of up to 56 mm in diameter., Herringbone main gear:, Experience of previous years shows that conventional gear trains have reached their limit with regard to performance. The increasing power made available by latest Lipoly batteries calls for new concepts. We are proud to present this new gear technology, which includes herringbone gears. This type of gear has never before been used in a model helicopter., Its main advantages are:, - Considerably more transmission efficiency - Very smooth running - Extremely low noise level, Suggested Kit Combination:, , motor:, Scorpion HK-4035-560, Note:, Mikado LOGO kits do not come with a pinion, tail blades, or main blades. You must choose your own pinion that matches your motor to obtain the headspeed that you desire. Please use our headspeed calculator if you need help figuring out what pinion you need!,
This is the Logo 600 V-Bar Flybarless version kit. We’ve ...Flying-Hobby
600DFC MAIN SHAFT(ESP)
| ●Weight | 63.2g(prox.) |
Instruction:, ●This main shaft is only for T-REX 600ESP model to fit with 600DFC head. Please do not use it on other models and purposes., Specification:, ●600DFC Main shaft(ESP) x 2(172.7mm),
●Socket collar screw x 2(M3x19mm) ●M3 nut x 2Flying-Hobby
CARBON CANOPY MOUNT SET (FOR MH-MCPX005/B)
| Used for Aluminum/Carbon Fiber/Delrin Frame w/3rd Bearing - BLADE MCPX Model | MH-MCPX005B |
Flying-Hobby
LENSMAN-18 GIMBAL MOUNTING FRAME (FOR STREAK 800PRO)
| Feature | - Used for |
| Lensman-18 Camera 3-Axis Gimbal (For Streak 800) Model | ALLENS-18A |
Item Included:, 2x Fiber Glass Lensman-18 Gimbal Mounting Fame 2.5mm (Refer to the photo),
to mount it onto Streak 800Pro Hexacopter. - Made of ...Flying-Hobby
KDE DIRECT ALIGN TREX 500 SERIES PERRFORMANCE TAIL UPGRADE V2
| Models | all TREX 500 versions (replaces stock Align part #H50030) |
Note: the Performance Tail Upgrade V2 provides superior tail control for sport and hard 3D flying styles. With dual flanged, radial ball bearing supported tail grips and precise machining tolerances for the brass bushing sleeve, the new design provides a truly slop-free, high-performance tail that is rock-solid for all maneuvers. The design is a simple retrofit for the common parts on the helicopter (replaces the stock plastic tail control links), with the ability to be used on all TREX 500 helicopters on the market and installed in a matter of minutes., Includes:, - Two (2) TREX 500 Aluminum Tail Control Link V2 Upgrades, Finish:, Clear anodize, brushed CNC matte,
- Four (4) Flanged Radial Ball Bearings 2 x 5 ...Flying-Hobby
MIK4357 MINI V-BAR V 5.2 FLYBARLESS STABILIZATION SYSTEM
| - If using a primary receiver, Mini V-Bar is compatible with the following 2.4GHz receivers | Spektrum, Jeti, Fasst. |
| - Dimensions | 28 x 37 x 13 mm |
| - Weight | 11 g |
| Contents | - Mini V-Bar |
| - Patch Cables | 3.1" For use with a primary receiver (if you opt NOT to use Satellites) |
Compatibility Notes:, - Mini V-Bar Blueline can, Overview:, The Mini V-Bar is the worlds smallest and lightest 3-axis virtual flybar system. It is designed to fit any small indoor helicopter. Despite its size, the Mini V-Bar is equipped with top-quality sensors and will thus satisfy the highest performance expectations. When light weight is a priority, the Mini V-Bar is your best choice. New version 5.2 Express Software allows for simplified programming and very easy flight tuning!, model helicopters with only a few limitations. Do not use the Mini V-Bar in the following types of helicopters:, - Large Scale heli's, Features:, - Programming is done via Control Panel or via USB using the PC software., Specs:, - 3-Axis Gyro System,
Aside from the nice new Blue case, the Mini V-Bar ...Flying-Hobby
MPA - MULTI-PORT SAFE PARALLEL ADAPTER FOR XH COMPATIBLE BATTERY PACKS
for full details on this amazing new adapter, only from Revolectrix. Unit includes: support for safe parallel charging of up to 6 same-cell-count packs at one time (2s-8s); supports 40A max charge/discharge rate; every port reverse polarity fuse protection of main battery wires; every cell/balance wire protected by self-resetting polyfuses with temperature warning indicators; supports non-balanced charge of up to two 1s LiPos used with "indoor models"; supports 1 RX and 1 TX NiCd/NiMH battery pack. Works with any Cellpro charger or battery workstation equipped with "XH MODE WIRING" option. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, as well as other brand chargers which are compatible with XH balance plugs and wiring. Be sure to purchase the proper cable to plug the MPA into your Charger or Battery Workstation.,
MPA is a Multi-Port Safe Parallel Module for safely interconnecting ...Flying-Hobby
APC PROPELLER 14X4.7SFP (CW)
| -Manufacturer | APC PROPELLERS in USA |
| -Size | 14×4.7 Inch |
| -Root Hole Diameter | 5-6mm |
| -Center hub thickness | 6mm |
| -Weight | 25.3g/pcs |
Introduction:, This is the Genuine APC Composite 14x4.7 Propellers. APC Propellers are the most carefully and accurately molded in the USA. The blade shapes are rated as the most efficient and silent manufactured in the aircraft models., Specification:, Items Included:, 1x APC Propeller 14x4.7SFP (CW),